The angle grinder, which is also known as disc grinder is the power tool which is handheld and use for different purposes, which include; polishing, cutting and grinding. It is also powered by compressed air, electric motor or petrol engine and it makes the difficult work easier. The main uses of angle grinder include removal of extra material from the piece. The kind of discs which are used in the angle grinder are; sanding discs, polishing pads, grinding stones, abrasive grinding discs, and many other discs as well.
In the metal cleaning, the wire brush is used for the cleaning purpose. In the usage, it needs to make sure that the brush is spinning away and the brush is catching on the edges. Moreover, is also needs to be made sure that the threads are matching to the spindle threads in the grinder. Another use of angle grinder is to cut rebar. In the event of cutting rebar, the metal cutoff needs to be mounted in the angle grinder. Safely uphold the rebar, and via the metal, the cutoff is dropped, and it permits the weight of the tool. It also needs to be assuring that the other side should allow being dropped freely.
Another usage of angle grinder is scoring the title face. In the tile face, the first step is to mark the outline of the cut and the cut should be made safely at the front and back of the tiles. Indenting and slicing earthenware or stone tile to fit around outlets and different checks is troublesome if not incomprehensible with standard tile cutters. Nevertheless, a point processor fitted with a dry-cut precious stone wheel makes off work of these troublesome cuts.
Sharpening of blades is also one of the usages of the angle grinder. For this process, the first step is to orient the grinder and then adjust the blade guard to deflect the sparks and then align the grinding wheel. Finally, with the processor off, rest the pounding wheel against the cutting edge and change the point of the processor to coordinate the edge’s slant. This is the position you will need to keep up as you granulate the edge. Lift the processor from the edge, switch it on and let it come to speed before moving it into the sharp edge.
The safety measures should be adopted to use the angle grinder. The main reason is that the angle grinder produces sparks in the cutting metals. Therefore, there is the great risk to face and eyes to the people. Therefore, the angle grinder should not be used without the handle or guard. Use the vision goggles or safety glasses while using. Moreover, it should ensure that the handles and guard are secure and safe. It should also assess that the do not put the grinder down until it is rotating.
I hope that after reading this article, you will be able to solve your problem of how to the best use of angle grinder. As it needs some precautions, you must keep in mind all above-mentioned safety measures and points, when you use the angle grinder.